Every farmer who prefers to breed eared animals can make drinkers for rabbits with his own hands. Photos and original ideas can be found on the Internet, and the tools will need a standard minimum. Owners of rabbits are trying to equip everything so that pets receive maximum convenience and comfort.
Drinking bowl for rabbits
To create a farm, each owner should take care of where the rabbits will live. In addition to strong and comfortable cages, it is necessary to properly equip a feeding place. And a drinker for a rabbit is an important moment. A good drinker should be strong, as large as possible and comfortable for the pets themselves.
Homemade drinkers for rabbits: features and recommendations
Often equipment for animals costs a lot of money. And many farmers try to save on some elements whenever possible. It is good that almost all devices for animal husbandry, everyone can make a drinker on their own at home and at the same time use improvised means. Let’s take a closer look at a few options on how to make a practical and simple drinker for your rabbits.
The main options for making a drinker are:
They are often found because they have special positive qualities. It is very easy to build them, because the design is very simple. In addition, you do not need to spend money on materials. All you need is a plastic bottle. It is necessary to fix it so that the neck goes down. You need to attach directly to the wall of the cell. So you do not have to create additional frames and supports. For fastening, it is better to use wire or clamps.
This type of drinking bowl is quite practical for both the owners and the rabbits themselves. Such a device consists of a reservoir. And clicking in a certain place, water will flow. So this is also an unusually economical option. Often there is a name. "nipple" drinking bowl. The fact is that in order to get water, the rabbit must press the special ball with its tongue.
Cage nipple drinker
Using a special flushing system, the liquid collects over time in the tank, which is intended for this. And already from this capacity the trunk with tubes is leaving. Through these tubes, water enters each cage with rabbits. And already in the cage, each individual drinker has a ball or nipple.
Farm nipple drinker
Drawings and recommendations for creating a drinking bowl for furry animals
For beginners "builders" it is best to make an elementary option. So is the bottle. Before construction, you need to stock up on such materials:
- plastic bottle;
- metal wire;
- rubber valve;
- stainless steel plate.
Before starting work, you need to determine the parameters and select the drawings that suit you best. Alternatively, you can create them yourself. Using the scheme will avoid errors. Detailed instructions below.
- Take a bottle that should serve as a future drinker and wash it well.
- In the central part of the bottle, you need to make a hole so that its size slightly exceeds the head of the rabbit.
- After this, it is necessary to attach the bottle in a horizontal position to the cage itself. The nuance is that you often have to fill in the water and control the water level in the tank.
If you saw that the water on the contrary had stagnated, began to bloom and acquire algae, then you need to throw it out and build a new one. Wash and put back. not a solution. Even if the water in the plastic bottle does not deteriorate, it is still necessary to replace at least once a month. Adhering to such instructions when you are going to make a drinker is easy and economical.