If you have a standard cage, then the purchased option is more suitable, if not, then you can not guess with the sizes and the selected drinker will remain out of work.
If you have a standard cage, then the purchased option is more suitable, if not, then you can not guess with the sizes and the selected drinker will be left without a destiny.
As a rule, 3 main types of drinkers are distinguished. these are cup drinkers, bottle drinkers and nipple drinkers. The first two types, if desired, can be done with your own hands, the last option is only bought.
Cup drinkers for rabbits
At home, ceramic bowls and cans (often cans) are usually used for this type of drinkers. The simplicity of such a drinker is convenient for the owner of the rabbit; therefore, this species remains the most popular among rabbit breeders. Cup drinkers, like any others, have positive and negative characteristics.
The benefits of cup drinkers are:
- quick adaptation of rabbits to this method of drinking;
- optional configuration or assembly when installed in a cage;
- ease of use due to the free access of the animal to water;
- ease in washing and disinfection;
- the most economical option among other types of drinkers.
Of course, along with the advantages, there are disadvantages.
- rabbits often tip the drinker by pouring water to the bottom of the cage;
- rapid water pollution, which can harm animals.
It is important that during the drinking process, it was convenient for rabbits to approach the drinker and not feel any physical inconvenience. For this, the main part of the drinker is placed on the outside of the cage, and the animals are left with only a place to drink. With this approach, the owner will be able to freely change the water in the cell. Therefore, this choice will make life easier for both your pets and the owner of rodents.
As a rule, such do-it-yourself drinkers for rabbits are made in most cases. The exception is only mass breeding of rodents. In rabbit farms, they usually use automatic drinkers for rabbits with a centralized tank supplying water to the cup drinkers through the float flush system.
At home breeding of rabbits, it is not difficult to eliminate the problem of turning a cup drinker. The main decision is to use the usual two nails, which are nailed to the cell vertically to each other. Their hats are wrapped in an arc so that another nail freely passes into the hole from the arc. The hat of the third nail hooks onto the upper arc and abuts against the bottom of the drinker, passing through the lower arc. Such manipulations prevent the drinker from turning over.
Drinking bowls for rabbits under a bottle
This type of drinking bowl has many advantages over other representatives:
- simple construction;
- low probability of dirt and infection due to the small size of the cup under the bottle;
- protection of the filer against overturning.
This is due to the fastening of the bottle to the mesh of the cage.
In its manufacture, experts advise using ordinary oval cans and plastic bottles.
Thus, the water in the rodent’s cage is always preserved:
- constant monitoring of the presence of liquid in the drinker due to the transparency of the bottle;
- low price of a drinker.
Bottle or semi-automatic drinkers are the second most popular for creating them at home. As a rule, this is not a big deal for an entrepreneurial owner.
In its manufacture, experts advise using ordinary oval cans and plastic bottles. They are attached to the outer part of the cell using a self-tapping screw, as well as a piece of tin.
Bottles are filled with water and placed with the neck down directly into the bowl. Vertical holes (at least 2) in the neck of the bottle are made at a level where you will fill the cup. When rodents drink the required amount of water, it will again fill the cup to the desired level.
The convenient location of the bowl is extremely important for rabbits. It is necessary to take into account their offspring. If the farm has young animals, then the height of the cup should be 5-8 cm, and after it is deposited from adults. 10-12 cm from the floor of the cage. The desired water level is set at a distance of 1 cm from the edge of the drinker. When installing a drinker in a cage, its entry should not exceed 3 cm. The chosen approach will ensure the purity of water for your animals.
Organization at home lends itself to a car drinker for rabbits. As a rule, it is made from a storage tank (if there is no water supply), a regulating tank with a float device and funnel-shaped drinking bowls. The float device in it maintains the required water level. This works on the principle of communicating vessels. The only drawback is the placement of all cells with rabbits at the same level. This solution evenly supplies animals with water. As a rule, the permissible slope of the pipe is 0.05 cm per 1 m of pipe length.
Nipple drinkers for rabbits
The most modern and practical are nipple drinkers for rabbits. They provide rabbits with constant access to clean water, easily attach to the cage, and allow you to hang the drinker at a height suitable for a rodent. Nipple drinkers for rabbits dispense water to the animal dosed, as it flows only when the rodent presses the ball. They do not turn over, and the water does not spill into them.
Nipple drinkers for rabbits are usually bought. A volume of at least 500 ml is the best choice, as an adult healthy rabbit needs 1 liter per day. clean water.
The disadvantages of nipple drinkers include:
- freezing of water in a drinking bowl at low temperatures;
- small volume of drinking bowl;
- long filling of the drinker;
- lids wear out, begin to leak.
To solve the problems of freezing water, you need to wrap a thick layer of cloth on the drinker and constantly monitor the water in the drinker. Also, the filling of drinking bowls with water in the cold season should be no more than two-thirds. Thanks to this behavior, you can save the drinker and you will always be sure of the presence of fresh water in it. If you do not follow these rules, the water will simply break your drinker.
Nipple drinkers for rabbits are usually bought. A volume of at least 500 ml is the best choice, as an adult healthy rabbit needs 1 liter of clean water per day.
Their main defect is leakage:
- check the drinker for leakage, for this the seller must pour water into it and press on the ball for half a minute. after such manipulations, water should not drip;
- bubbles should rise up in the drinker, otherwise the rabbit will not be able to drink water due to the tight nipple;
- the hole on the gasket on the inside of the cover should not be small, but medium in size;
- if your rabbit is decorative, then a nipple with a large ball will not suit him;
- you must tap the nipple for 2 minutes to make sure that there is constant water in the bowl.
Having your rabbits is always wonderful. Therefore, give your rabbits water with clean, fresh water! An attentive host, they will always be healthy!