DIY do-it-yourself drinking bowl for rabbits

When breeding any animals, water always occupies a special place. Without this element, the content and survival of no living creature on earth is unacceptable. Of course, rabbits are no exception. When keeping them at home, it is imperative to provide their wards with high-quality water tanks. Making high-quality and durable do-it-yourself drinking bowls for rabbits is not such a difficult task. Moreover, there are several types of designs, each with its own characteristics.

DIY do-it-yourself drinking bowl for rabbits

DIY drinking bowls for rabbits

The reason for the need for drinkers

Many novice rabbit breeders make the same mistake using ordinary bowls as drinkers. There are a couple of reasons that reduce the usefulness of this method to a minimum.

First, rabbits often knock over loose bowls in their cages. A common misconception about their cleanliness intervenes. No, rabbits are really pretty "cleanlings." But, in addition, they are very active animals, and the space of cells, nevertheless, is limited. Therefore, the question of when they will overturn such a drinker is a rhetorical one. It is simply inevitable.

As a result, water is poured out of the bowl, and the rabbit loses the desired liquid. Such an outcome is hardly favorable.

Secondly. the eared ears always need a large amount of water. This is especially true for puppet rabbits, or those who raise already born offspring. And in order to provide them with enough water, using a regular bowl, you will have to resort to small basins. Given the limited area and height of rabbit rabbit ceilings, this leads to certain difficulties.

These two reasons are basic, but not the only ones. Although, there are enough of them to make sure that special construction-containers for rabbit water are necessary. Then how to make a drinker for rabbits with your own hands, especially having before your eyes is not very difficult.

Basic drinker requirements

Now about what should be drinking bowls for rabbits. Yes, there are certain requirements for these seemingly simple structures. If the drinker answers as such, you need not worry that the rabbit will not have enough water, or that it will be too dirty (although this depends not only on the capacity, of course).

The first of the requirements is that the drinker should be clearly fixed. Any means are suitable for this. glue, wire, nails, rope. Anything that will allow the structure to be in one place without changing its position can be used. Unless, of course, it meets the second of the requirements.

It consists in the fact that the drinker should be safe in the full sense of the word. That is, not traumatic. If the rabbit cuts, hits, or in any other way gets injured about it, or parts of its structure, this drinker is worthless. Animal safety here should prevail over the simplicity of the design.

Read more:  How to make DIY drinkers for rabbits

The third point regarding the requirements for drinking bowls for rabbits. they must be reliable. No holes, damage, or anything else that could contribute to the flow of water. In addition, it is impossible for the rabbit to have at least some opportunity to damage the structure, even if he wants to. Therefore, in the manufacture it is better to use materials that are sufficiently strong and not too seductive for the ears.

And the fourth. drinking bowls should be convenient, both for rabbits and for the rabbit breeder. Of course, the convenience of animals is a priority here, since it is they who will use this source of water. However, if it’s very difficult for a person to fill the drinker, this will complicate his work, slow down the maintenance of all rabbitry, and can even cause stress for rabbits, who will be frightened by an irritated worker (everyone’s nerves are not iron).

Types of structures

Now the turn has come to describe the various designs of drinking bowls. Over the decades of development of rabbit farming, farmers have invented many options for these useful and necessary devices. Below are examples of the most common, simple and easy to use and manufacture structures. So, a few answers to the question of how to make drinkers for rabbits with your own hands, resorting to the help of trainers and photos.

Cup drinker

The most common, classic option is a bowl for rabbits. As the name implies, it uses ordinary bowls of various materials. The same goes for feeders for rabbits.

In order to avoid overturning, rabbit breeders resort to various tricks. Some make the bottom heavier, some attach it tightly to the floor or wall of the cage, some invent something completely different.

One way or another, this method has its advantages and disadvantages. The former include ease of acquisition and operation on the farm. The second. unhygienic and uneconomical. Any dirt can easily get into such a drinking bowl and spoil the water, which will lead to a forced change of it. In addition, rabbits, if it is simply heavier, still have a chance to turn over their drinkers, which also does not affect the design efficiency in the best way.

Plastic bottle drinker

One of the cheapest options is a design based on a plastic bottle. These items are very common today and their price is not at all high, so it’s not at all difficult to provide such constructions to even a not very small good farm.

So, here we are making a simple drinking bowl for domestic rabbits, possibly even with heating. What materials will be required for the entire structure? Here is a sample list of them:

  • a half liter plastic bottle;
  • small diameter drill or nail;
  • tin can from sprat, or any other design of a similar shape and size;
  • pliers;
  • wire or any other option for fastening the drinker to the cage.
Read more:  Do-it-yourself drinkers for rabbits

The procedure for assembling such a drinking bowl for domestic rabbits is quite simple, and even a person who does not have special skills in such areas can handle it. You need to start by preparing the bottle. The first step is to unscrew the lid, but do not remove it far. She will still be needed. Two small holes with a diameter of 2-3 mm are made in the neck of a drill or nail. Then the bottle is filled with water, and the lid is screwed into place.

The next step on the way to making a rabbit car drinker. will use a prepared container, such as a can, the trimmed bottom of another bottle or some can. The main thing is that it should be of an oblong shape, the water container should be stable in it, and there should be a place from which rabbits will drink. A bottle with the main supply of liquid will be installed in it, with its neck down.

Further, the principle of communicating vessels comes into effect. as the rabbit drinks from the drinker, water will enter it from the plastic "tanks". The last moment is to fix the drinker on the cage. The tank, in any situation, should be outside. Inside is only the "drinking" part. To do this, special holes are made in some cells (or they are already available initially), into which the latter penetrates. Thus, the rabbit will always have access to water, but will not be able to damage the tank. Large float troughs work by the same principle.

The disadvantage of these simple automatic drinkers for rabbits is their fragility. And, alas, little can be done with her. Even if a part inaccessible to rabbits is reliable, then a bottle screwed with wire or even a rope will eventually wear out and become unusable, especially in winter. However, this is not surprising, and many rabbit breeders still often use this option, due to its cheapness, and simply regularly change the design basis. In general, a drinker for a rabbit from a plastic bottle can serve well at first.

Nipple drinker

Drip or nipple drinkers for rabbits are considered to be very popular and effective (and they may also require photos of design drawings). Most often it is used for keeping and growing young animals that have not yet learned how to suck. Yes, nipple designs are also called nipple designs, because in order to get the desired water, the rabbit must press the nipple with its tongue. This approach has its own characteristics, advantages and, of course, disadvantages.

But first, you need to talk about how to make the right vacuum / nipple drinker with your own hands. The design itself will be more complicated than the previous two. First of all, due to the fact that the tank must be metal or from very strong plastic, as well as due to the need for a nipple.

Read more:  How to make a drinker for rabbits Homemade drinkers

So, first. a nipple drinker tank for rabbits. For it, you can use an old thermos, or any other sufficiently tight container, which can safely contain any liquid. If you have the skills and materials with tools, you can assemble and weld it yourself, but not everyone can cope with this task, and almost everyone has old thermoses.

The second point is the vacuum nipple. Here, it’s also better to get ready-made one, because making a safe, reliable and working at home is not an easy task. But these vacuum structures are not expensive at all, so even for a large farm it’s not so difficult to get the required amount.

And to fasten these two components is much easier. After installation, even adult rabbits quickly learn to use a vacuum nipple drinker, and there are even fewer problems with young animals. But during the winter period there are even fewer problems with drinking.

Additional recommendations

Experienced farmers made several recommendations regarding the assembly and operation of drinking bowls, which can thoroughly help beginner rabbit breeders. Especially at the very beginning of their journey.

First, the drinker should be such that no foreign elements fall into it. To do this, some kind of lid is required on it or (in the case of cup drinkers) a regular change of water is required. Literally every day. This, of course, somewhat complicates the overall operation of the farm.

Secondly, inexpensive and reliable materials should be chosen as materials. At the same time, reliability is a priority here. A slightly more expensive drinker, which will last three times longer, is economically much more profitable, especially winter.

Third, simple home-made drinkers after several years of the existence of the farm are relevant in only one case. If they are made on the model of reliable factory, with cheaper manufacturing technology found. Otherwise, sooner or later, when expanding the farm, it is better to switch to wholesale purchases of branded designs.

Well, the fourth. heating the drinking bowls (especially if it is a winter construction) for the rabbits also does not hurt. A good heated system will provide rabbits with warm water, which is so important in the cold periods of the year.


Making enough working drinkers for rabbits with your own hands at home is quite real. The main thing is to have a certain degree of patience and diligence in preparation for the assembly procedure. Then, at first, these drinkers will save a considerable amount of money, and will provide rabbits with a steady flow of clean water.